What is the difference between a standard sewage ejector pump and a grinder pump?

A standard sewage ejector pump uses an open impeller to pass soft solids up to 2 inches in diameter through a 2-inch or 3-inch pipe. A grinder pump uses rotating cutter blades to grind solids into a fine slurry, allowing waste to be pumped higher, further, or through smaller 1.25-inch or 1.5-inch discharge pipes.

Why is my sewage pump high-water alarm going off?

A sewage alarm triggers when wastewater in the pit rises above safe operating levels. This is usually caused by a tripped circuit breaker, a stuck or failed float switch, a clogged discharge line, or a dead pump motor. Turn off indoor fixtures and call us immediately for emergency service.

Do you provide septic tank pumping trucks or waste hauling?

No. We specialize strictly in the mechanical hardware, electrical controls, float switches, and pump replacements inside sewage pits and septic dosing tanks. We repair and install the physical pumps and piping that move the waste, rather than operating septic pump-out trucks.

Sewage Ejectors, Grinder Pumps, and Septic Effluent Pumps

in Simcoe County, Muskoka, Barrie, Orillia, Innisfil Collingwood, Bradford, Orangeville, Alliston.

Call or Text Us Any Time

24/7 Emergency Sewage Pump Repairs

A failed sewage ejector or grinder pump can cause immediate wastewater backups into your basement or property. We provide 24/7 emergency sewage pump replacement, float switch repairs, and alarm diagnostics throughout Simcoe County, Muskoka, Barrie, Orillia, and Collingwood.

Call or Text Us Any Time

20+ Years of experience

Family-owned, locally operated and trusted across Simcoe County and Muskoka.

Licensed & insured technicians

Professional inspection, clear recommendations, and upfront pricing. BBB-accredited service.

We Fix It or It’s Free

Approved repairs are completed within the agreed scope

or you do not pay.

Sewage Ejector Pump Repair & Installation

Basement bathrooms, laundry facilities, and below-grade plumbing require heavy-duty sewage ejector pumps to lift solids and wastewater up to main sewer or septic lines. Drain Right Now replaces and services mechanical sewage ejector hardware. Our ejector services include:

Submersible sewage ejector pump replacement
New basement sewage pit and pump installations
Clogged discharge line and check valve repairs
Heavy-duty float switch testing and calibration
Sealed gas-tight pit cover gasket installations
High-water level alarm system troubleshooting

Our team isolates mechanical pump jams and electrical switch failures quickly. We install commercial-grade, solids-handling ejector pumps engineered to prevent foul odors and keep your basement plumbing operating cleanly.

Heavy-Duty Grinder Pump Upgrades

When wastewater must be pumped over long distances, high elevations, or through small-diameter discharge pipes, standard ejector pumps can clog. We install high-torque grinder pumps designed to macerate solids before pumping. Our grinder pump services include:

High-torque solid waste grinder pump installation
Clogged or jammed grinder pump repairs
Commercial and residential waste lift station service
Dual-cutter blade replacement and motor overhauls
Pressure switch and level control upgrades
Thermal overload and control panel repairs

Preparation for long-distance wastewater discharge

We inspect your discharge pipe size and total dynamic head before installing a grinder pump. Our goal is to provide a powerful, jam-resistant pump system that processes household waste reliably without clogging.

Septic Effluent Pump Replacement & Service

Dosing tanks and engineered septic systems rely on specialized effluent pumps to push clarified wastewater out into leaching beds or raised filter beds. Drain Right Now services and replaces high-head septic effluent pumps. Our effluent services include:

High-head septic effluent pump replacement
Dosing tank pump and float tree calibration
Effluent filter cleaning and maintenance
Corroded junction box and wiring repairs
Check valve and union disconnect installations
Dosing tank high-water alarm diagnostics

We ensure your effluent pump delivers precise dosing volumes to your septic field. Installing reliable, corrosion-resistant effluent pumps prevents premature leaching bed saturation and protects your overall septic investment.

Float Switch & Control Panel Diagnostics

Reliable sewage and septic pumping relies heavily on sealed float switches, control panels, and warning alarms operating inside harsh environments. We diagnose, wire, and replace waste pump electrical controls. Our control services include:

Piggyback and tethered float switch replacements
Differential level control float tree setups
Outdoor weatherproof control panel repairs
High-water visual and audible alarm installations
Pump capacitor and relay replacements
Corrosion-proof sealed wiring junction box setups

We replace failing, waterlogged floats with heavy-duty mechanical switches. Our technicians wire sealed control boxes to ensure clear signal transmission, preventing unexpected pit overflows and motor burnouts.

Basement Sewage Pit Maintenance & Unclogging

Solid waste, wipes, and foreign debris can accumulate at the bottom of sewage basins, causing pump impellers to bind or float switches to hang up. Drain Right Now provides complete mechanical pit maintenance and pump unclogging. Our maintenance services include:

Sewage pit mechanical cleanouts and clearing
Bound pump impeller debris extraction
Basement vent line connection sealing
Silent check valve installations
Gas-tight pit lid bolt and seal replacements
Complete system discharge flow testing

Evaluation for quiet, odor-free mechanical operation We inspect your basin seals, check valves, and vent connections during every service call. Our team restores quiet, sanitary mechanical operation while completely sealing out hazardous sewer gases.

FAQs

What is the difference between a standard sewage ejector pump and a grinder pump?

A standard sewage ejector pump uses an open impeller to pass soft solids up to 2 inches in diameter through a 2-inch or 3-inch pipe. A grinder pump uses rotating cutter blades to grind solids into a fine slurry, allowing waste to be pumped higher, further, or through smaller 1.25-inch or 1.5-inch discharge pipes.
Why is my sewage pump high-water alarm going off?

A sewage alarm triggers when wastewater in the pit rises above safe operating levels. This is usually caused by a tripped circuit breaker, a stuck or failed float switch, a clogged discharge line, or a dead pump motor. Turn off indoor fixtures and call us immediately for emergency service.
Do you provide septic tank pumping trucks or waste hauling?

No. We specialize strictly in the mechanical hardware, electrical controls, float switches, and pump replacements inside sewage pits and septic dosing tanks. We repair and install the physical pumps and piping that move the waste, rather than operating septic pump-out trucks.